SET DATA MAPPING INDEX

PSET_DATA_MAP_IND

CALL SEQUENCE

void pset_data_map_ind(

Pint	index	/* data mapping index 	*/

)

PHIGS STATE

EFFECT

A SET DATA MAPPING INDEX element is inserted in the open structure after element pointer or replaces the element indicated by element pointer, depending on edit mode. Element pointer then points to the SET DATA MAPPING INDEX element. The value specified by index is associated with the element.

When an element of this type is interpreted, the current data mapping index entry in the PHIGS traversal state list is set to the specified value. This value is used to display area primitives which follow.

When an element of this type is interpreted, if the specified entry is not available on a workstation, the entry corresponding to an index value of 1 is used.

EXTENSION TO THE PHIGS STANDARD

If GPHIGS is in NRS mode, the effect of this function is different from the effect described in the standard..

In NRS mode, (see OPEN PIPE), the element is not stored in a structure. It is sent to the workstation on which the pipe is opened.

ERRORS

5

Ignoring function, function requires state (PHOP,*, STOP,*)

100

Ignoring function, the bundle index value is less than one

SEE ALSO

fill area set 3 with data, set of fill area sets 3 with data, triangle set 3 with data, triangle strip 3 with data, quadrilateral mesh 3 with data, non-uniform b-spline surface with data, set individual asf, set data mapping representation, open structure, open pipe (ext), inquire current element content, inquire current element type and size