2 Ignoring function, function requires state (PHOP, *,*,*)
3 Ignoring function, function requires state (PHOP, WSOP,*,*)
4 Ignoring function, function requires state (PHOP, WSCL, STCL, ARCL)
5 Ignoring function, function requires state (PHOP,*, STOP,*)
6 Ignoring function, function requires state (PHOP,*, STCL, *)
7 Ignoring function, function requires state (PHOP, *, *, AROP)
8 Ignoring function, function requires state (PHOP,*, PIPO, *)
41 Ignoring function, GPHIGS already in NDDS mode
42 Ignoring function, GPHIGS not in NDDS mode
50 Ignoring function, connection identifier not recognized by the implementation
51 Ignoring function, this information is not yet available for this generic workstation type: open a workstation of this type and use the specific workstation type
52 Ignoring function, workstation type not recognized by the implementation
53 Ignoring function, workstation identifier already is in use
54 Ignoring function, the specified workstation is not open
55 Ignoring function, workstation cannot be opened for an implementation dependent reason
56 Ignoring function, specified workstation is not of category MO
57 Ignoring function, specified workstation is of category MI
58 Ignoring function, specified workstation is not of category MI
59 Ignoring function, the specified workstation does not have output capability (i.e. the workstation category is neither OUTPUT, OUTIN, nor MO)
60 Ignoring function, specified workstation is not of category OUTIN
61 Ignoring function, specified workstation is neither of category INPUT nor of category OUTIN
62 Ignoring function, this information is not available for this MO workstation type
63 Ignoring function, opening this workstation would exceed the maximum of simultaneously open workstations
64 Ignoring function, the specified workstation type is not able to generate the specified generalized drawing primitive
100 Ignoring function, the bundle index value is less than one
101 Ignoring function, the specified representation has not been defined
102 Ignoring function, the specified representation has not been predefined on this workstation
103 Ignoring function, setting this bundle table entry would exceed the maximum number of entries allowed in the workstation
104 Ignoring function, the specified linetype is not available on the specified workstation
105 Ignoring function, the specified marker type is not available on the specified workstation
106 Ignoring function, the specified font is not available for the requested text precision on the specified workstation
107 Ignoring function, the specified edgetype is not available on the specified workstation
108 Ignoring function, the specified interior style is not available on the workstation
109 Ignoring function, interior style PATTERN is not supported on the workstation
110 Ignoring function, the specified colour model is not available on the workstation
111 Ignoring function, the specified HLHSR mode is not available on the specified workstation
112 Ignoring function, the pattern index value is less than one
113 Ignoring function, the colour index value is less than zero
114 Ignoring function, the view index value is less than zero
115 Ignoring function, the view index value is less than one
116 Ignoring function, one of the dimensions of pattern colour index array is less than one
117 Ignoring function, one of the dimensions of the colour index array is less than zero
118 Ignoring function, one of the components of the colour specification is out of range. The valid range is dependent upon the current colour model
119 Ignoring function, the specified depth cue mode is not available on the workstation
120 Ignoring function, the depth cue index is less than one
121 Ignoring function, the colour mapping index is less than one
122 Ignoring function, the specified polyline shading method is not available on the workstation
123 Ignoring function, the specified interior shading method is not available on the workstation
124 Ignoring function, the specified reflectance model value is not available on the workstation
125 Ignoring function, the total of the colour range fields in all the table entries is too large
126 Ignoring function, the specified colour mapping method is not available on the specified workstation
127 Ignoring function, the specified approximation criteria type is not available on the specified workstation
128 Ignoring function, the specified parametric surface characteristics type is not available on the specified workstation
129 Ignoring function, the light source index is less than one
130 Ignoring function, invalid reference planes; DQMIN > DQMAX
131 Ignoring function, the specified light source type is not available on the workstation
132 Ignoring function, the specified spot light spread angle is out of range
133 Ignoring function, one of the entries in the activation list or desactivation list is less than one
134 Ignoring function, the requested entry constains a general colour specification with colour type other than INDIRECT
135 Ignoring function, the same entry exists in both the activation list and the desactivation list
136 Ignoring function, one of the components of the colour specification is out of range
137 Ignoring function, the specified data mapping method is not available on the specified workstation
138 Ignoring function, one or more of the fields in the specified data record is inconsistent with the specified type
139 Ignoring function, the specified reflectance property type is not available on the specified workstation
140 Ignoring function, one of the depth cue scale factors is not in the required range
150 Ignoring function, setting this view table entry would exceed the maximum number of entries allowed in the workstation view table
151 Ignoring function, invalid window: XMIN>>=XMAX, YMIN>>=YMAX, ZMIN>>ZMAX, UMIN>>=UMAX or VMIN>>=VMAX
152 Ignoring function, invalid viewport: XMIN>>=XMAX, YMIN>>=YMAX or ZMIN>>ZMAX
153 Ignoring function, invalid view clipping limits: XMIN>>=XMAX, YMIN>>=YMAX or ZMIN>>ZMAX
154 Ignoring function, the view clipping limits are not within NPC range
155 Ignoring function, the projection viewport limits are not within NPC range
156 Ignoring function, the workstation window limits are not within NPC range
157 Ignoring function, the workstation viewport is not within display space
158 Ignoring function, front plane and back plane distances are equal when: extent of the projection viewport is non zero
159 Ignoring function, the view plane normal vector has lengh zero
160 Ignoring function, the view up vector has length zero
161 Ignoring function, the view up and view plane normal vectors are parallel thus the viewing coordinate system cannot be established
162 Ignoring function, the projection reference point is between the front and back planes
163 Ignoring function, the projection reference point cannot be positioned on the view plane
164 Ignoring function, the back plane is in front of the front plane
200 Warning, Ignoring structures that do not exist
201 Ignoring function, the specified structure does not exist
202 Ignoring function, the specified element does not exist
203 Ignoring function, specified starting path not found in CSS
204 Ignoring function, specified search ceiling index out of range
205 Ignoring function, the label does not exist in the open structure between the element pointer and the end of the structure
206 Ignoring function, one or both of the labels does not exist in the open structure between the element pointer and the end of the structure
207 Ignoring function, the specified path depth is less than zero (0)
208 Ignoring function, the display priority is out of range
209 Ignoring function, the pick id does not exist in the open structure between the element pointer and the end of the structure
250 Ignoring function, the specified device is not available on the specified workstation
251 Ignoring function, the function requires the Input device to be in REQUEST mode
252 Ignoring function, the function requires the Input device to be in SAMPLE mode
253 Ignoring function, the specified prompt echo type is not available on the specified workstation
254 Ignoring function, invalid echo area volume: XMIN>>=XMAX, YMIN>>=YMAX or ZMIN>>ZMAX
255 Ignoring function, one of the echo area volume boundary points is outside the range of the device
256 Warning, theInput queue has overflowed
257 Ignoring function, Input queue has not overflowed, since OPEN PHIGS or last invocation of INQUIRE, Input QUEUE OVERFLOW
258 Ignoring function, Input queue has overflowed, but associated workstation has been closed
259 Ignoring function, the Input device class of the current Input report does not match the class being requested
260 Ignoring function, one of the fields within the Input device data record is in error
261 Ignoring function, initial value is invalid
262 Ignoring function, number of points in the initial stroke is greater than the buffer size
263 Ignoring function, length of the initial string is greater than the buffer size
300 Ignoring function, item type is not allowed for user items
301 Ignoring function, item length is invalid
302 Ignoring function, no item is left in metafile Input
303 Ignoring function, metafile item is invalid
304 Ignoring function, item type is unknown
305 Ignoring function, content of item data record is invalid for the specified item type
306 Ignoring function, maximum item data record length is invalid
307 Ignoring function, user item cannot be interpreted
350 Warning, the specified escape is not available on one or more workstation in this implementation. The escape will be processed by those workstation on which it is available
351 Ignoring function, one of the fields wuthin the escape data record is in error
400 Ignoring function, the archive file cannot be opened
401 Ignoring function, opening this archive file would exceed the maximum number of simultaneously open archive files
402 Ignoring function, archive file identifier already in use
403 Igoring function, the archive file is not a GPHIGS archive file
404 Ignoring function, the specified archive file is not open
405 Ignoring function, name conflict occured while conflict resolution flag has value ABANDON
406 Warning, the archive file is fuil. Any structures that were archived were archived in total
407 Warning, some of the specified structures do not exist on the archive file
408 Warning, some of the specified structures do not exist on the archive file. PHIGS will create empty structure in their place
450 Ignoring function, the specified error file is invalid
500 Ignoring function, the specified order is less than one
501 Ignoring function, not enough control points for the specified order
502 Ignoring function, the specified order is inconsistent with number of knots and control points
503 Ignoring function, the knot sequence is not non-decreasing
504 Ignoring function, one or more of the vertex indicices is out of range
505 Warning, the fill area is degenerate
506 Ignoring function, the parameter range is inconsistent with the knots
507 Ignoring function, the fourth coordinate of a rational control point is less than or equal to zero
508 Ignoring function, a trimming curve order is less than 2
509 Ignoring function, a trimming curve does not contain enough control points for its specified order
510 Ignoring function, a trimming curve's order is inconsistent with its number of knots and control points
511 Ignoring function, a trimming curve's knot sequence is not non-decreasing
512 Ignoring function, a trimming curve's paramter range is inconsistent with its knots
513 Ignoring function, inconsistent edge flag specification
514 Ignoring function, the data lists do not all contain the same number of entries
515 Ignoring function, the specified colour type is INDIRECT
900 Storage overflow has occurred in GPHIGS
901 Storage overflow has occurred in CSS
902 Input/Output error has occurred while reading
903 Input/Output error has occurred while writting
904 Input/Output error has occurred while sending data to a workstation
905 Input/Output error has occurred receiving data from a workstation
906 Input/Output error has occurred during program library management
907 Input/Output error has occurred while reading workstation description table
908 Arithmetic error as occurred
2200 Ignoring function, start index is out of range
2201 Ignoring function, the length of the application's list is negative
2202 Ignoring function, enumeration type out of range
2203 Ignoring function, error while allocating a store
2204 Ignoring function, error while allocating memeory for a store
2300 Ignoring function, the transparency coefficient is out of range
2301 Ignoring function, the highlighting bundle index is out of range
3000 Ignoring function, the specified target does not exist
3001 Ignoring function, the first specified target does not exist
3002 Ignoring function, the second specified target does not exist
3003 Ignoring function, cannot create target
3004 Ignoring function, no region information found in store
3005 Ignoring function, cannot restore region on a different workstation
-100 Ignoring function, cannot find GPHIGS files directory, set GPHIGS_FILE to the path of the "file" directory in GPHIGS distribution
-110 Ignoring function, cannot find license file, contact your administrator
-111 Ignoring function, product not licensed for specified version, contact your administrator
-112 Ignoring function, bad license format, contact your administrator
-113 Ignoring function, bad license format, contact your administrator
-114 Ignoring function, the license has expired, contact your administrator
-115 Ignoring function, bad license key, contact your administrator
-116 Ignoring function, license internal violation, contact your administrator
-117 Ignoring function, license file is empty, contact your administrator
-118 Ignoring function, not licensed for this host, contact your administrator
-121 No license found for PHIGURE-C, contact your administrator
-122 No license found for GPHIGS-GUI, contact your administrator
-123 No license found for GPHIGS-FORTRAN, contact your administrator
-124 No license found for PHIGURE-FORTRAN, contact your administrator
-125 You have license only for upgrade, contact your administrator
-126 No license found for GPHIGS-ADA, contact your administrator
-127 No license found for PHIGURE-ADA, contact your administrator
-128 No license found for driver VRML 1.0, contact your administrator
-142 Ignoring function, invalid trigger type in trigger specification.
-172 Ignoring function, trigger list group must be in range 0 to 99.
-173 Ignoring function, trigger action must be in range 0 to 99.
-174 Ignoring function, invalid trigger specification in trigger list.
-401 Warning. Archive file version is older than expected