PHIGURE F77 Reference Manual
Volume 1
This is Reference Manual Volume 1
of PHIGURE V6.0 language F77
By G5G S.A.
A TGS Company
Avenue Henri Becquerel
Parc d'Activités Kennedy I
BP 227
33708 Mérignac cedex (FRANCE)
Phone : (33) 56 13 37 77 - Fax : (33) 56 13 02 10
TGS
Template Graphics Software, Inc.
9920 Pacific Heights Boulevard
Suite 200
San Diego 92121 4331
Phone : 619/457-5359 - Fax : 619/452-2547
Copyright © 1989 - 1996 by G5G S.A. All rights reserved.
No part of this documentation may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying, recording or by
any information storage and retrieval system, without permission in writing
from G5G S.A.
The information contained in this document may change without notice.
G5G makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchant ability and
fitness for a particular purpose. G5G shall not be liable for errors contained
herein or direct, indirect, special, incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
PHIGURE is a registered trademark of G5G S.A.
Use duplication by the U.S. Government is subject to restrictions as set forth
in paragraph (c) (1) (ii) of the DOD FAR Rights and Technical Data and Computer
Software clause at 252.227.7013 or in the equivalent clause of any other
applicable Government Regulations.
TRADEMARKS
GPHIGS, GPHIGS_GUI, PHIGURE are trademarks of G5G S.A.
Silicon Graphics and IRIS are registered trademarks and IRIS GL is a trademark
of Silicon Graphics, Inc.
Sun, Sun OS, Open Windows and XGL are trademarks and Solaris
and OPEN LOOK are registered trademarks of Sun Microsystems, Inc.
Starbase, PowerShade and VUE are trademarks of
Hewlett-Packard, Inc.
IBM, AIX, AIXwindows and RISC System/6000 are registered
trademarks, and AIX/6000, POWER Gt4, POWER Gt4e, POWER Gt4x, POWER Gt4i, and
POWER Gt4xi are trademarks of International Business Machines Corporation.
Alpha AXP, OPEN3D and DEC are trademarks of Digital Equipment
Corporation.
OSF-SVR, OSF-DEV, OSF-BASE, CXXOSF, and OSF 1.3 are trademarks of Open Software
Foundation, Inc.
OPEN LOOK is a registered trademark of UNIX System Laboratories, Inc.
XWindow System is a trademark of Massachusetts Institute of Technology.
All Other trademarks belong to their companies
OPGS V6.0 DOCUMENTATION'S SERIES
PHIGURE C REFERENCE MANUAL Vol. 1 Edition V6.0 - May 1996
PHIGURE C REFERENCE MANUAL Vol. 2 Edition V6.0 - May 1996
PHIGURE C REFERENCE MANUAL Vol. 3 Edition V6.0 - May 1996
PHIGURE F77 REFERENCE MANUAL Vol. 1(2) Edition V6.0
- May 1996
PHIGURE F77 REFERENCE MANUAL Vol. 2(2) Edition V6.0
- May 1996
PHIGURE F77 REFERENCE MANUAL Vol. 3(2) Edition V6.0
- May 1996
GPHIGS C FUNCTIONS Vol. 1 Edition V6.0 - May 1996
Graphic Functions
GPHIGS C FUNCTIONS Vol. 2 Edition V6.0 - May 1996
Inquire Functions
GPHIGS C FUNCTIONS Vol. 3 Edition V6.0 - May 1996
Input Functions
Extension Functions
GPHIGS QUICK REFERENCE GUIDE C Edition V6.0 - May 1996
GPHIGS F77 FUNCTIONS Vol. 1(1) Edition V6.0 - May
1996
Graphic Functions
GPHIGS F77 FUNCTIONS Vol. 2(1) Edition V6.0 - May
1996
Inquire Functions
GPHIGS F77 FUNCTIONS Vol. 3(1) Edition V6.0 - May
1996
Input Functions
Extension Functions
GPHIGS QUICK REFERENCE GUIDE F77(1) Edition V6.0 -
May 1996
GPHIGS USER GUIDE Edition V6.0 - May 1996
GPHIGS_GUI(3) Edition V6.0 - May 1996
OPGS INSTALLATION GUIDE Edition V6.0 - May 1996
(1) Documentation delivered with GPHIGS F77 option
(2) Documentation delivered with PHIGURE F77 option
(3) Documentation delivered with GPHIGS_GUI option
G5G - PHIGURE F77 REFERENCE MANUAL V6.0